I have a kenmore washer that is shaking like crazy at the end of the spin cycle. I have checked the springs and they appear to be in good shape. The vertical on was starting to stretch out the hole, so I drilled a new hole and reattached the spring. This made very little difference. I also pulled the horizontal springs and pulled on them. By hand they all required the same force to stretch them. I did not scale test them. Other notes:
1) there is no bearing whir or whine
2) shaking only happens at the end of spin cycle when the water has drained.
3) appears to be worse when there is a larger load in it.
Below is a video of the washer shaking. (turn down your speakers, it's loud.)
Any insight is greatly appreciated. Thanks in advance.
Sam
1) there is no bearing whir or whine
2) shaking only happens at the end of spin cycle when the water has drained.
3) appears to be worse when there is a larger load in it.
Below is a video of the washer shaking. (turn down your speakers, it's loud.)
Any insight is greatly appreciated. Thanks in advance.
Sam
via Kenmore top load washer shaking like crazy
by sams64
No comments:
Post a Comment