Lid lock failure please help

I have a GTW500answ0s top load washer. It stopped working so I put in consumer error mode and found out it’s a lid lock failure. I replaced lid lock itself, still nothing. Just replaced lid lock harness and still not working! I have ran the tests and washer will not spin at all. I have also noticed when I run the drain test, it leaks , which never happened before. Washer is not even a year old. Will probably call GE tomorrow, but I would rather fix it myself if possible.

via Lid lock failure please help
by Sarahjane17

MHWE251YG00 won’t start and stay on F1 & E2 codes

I have been working on this washer and replaced the bearings, cleaned everything, It ran for several loads fine but now it’s stopped starting the motor to spin and the water cuts off and then it throws those codes. So, ran a new wire (a mouse appeared to have chewed on it) that goes to the front and rear panels, and then took off the screw again to the rear of the tub, sanded that area and replaced that wire as well. It still won’t work. WTH could be wrong it’s this darn thing?

via MHWE251YG00 won’t start and stay on F1 & E2 codes
by Renata

F3E1 error code Whirlpool Duet

I read a couple of threads on here about this error code problem &the same issues we are having; error code comes on at some point in cycle. If the power button is hit while the machine is in a cycle, the machine will just hum. It does not help to unplug it, when you plug it back in it will start humming again & I cannot open the door even when the machine is unplugged. I read 2 threads where Jake talked about a part (cannot remember the exact name now...something with the word "dome" in...

F3E1 error code Whirlpool Duet

via F3E1 error code Whirlpool Duet
by mwgiedd

Fisher Paykel GW11 won’t power on

I have a Fisher Paykel GW11 that won’t power on. A few months ago the pump started acting up and I knew it was the pump after reading few online post. I thought it was empty of water and tipped it over to get to the pump but it still had some water left in it. Nothing touched the control board and I waited a day of so before I tried starting it but nothing happens now. There is no power going to machine at all, no lights no function no nothing. I read that it could be the control...

Fisher Paykel GW11 won’t power on

via Fisher Paykel GW11 won’t power on
by Rocket Man

Kenmore He2T

Good morning y'all.

I was given a kenmore he2t washer for use with livestock. Not interested in dumping a bunch of money in it. Just wanted to see if you all have any ideas.

Ive got it hooked up and level but its never run water in. Control panel changes setting and start and pause/ cancel works. Lock in the door works. The only thing ive noticed is that the " add a garment" light never goes off and the count down timer never starts. Any thoughts?

via Kenmore He2T
by Joshuamwalker

No agitator dogs? Unbalanced load help

Roper RTW4641BQ1
I appreciate any help greatly!
I have repaired a couple of machines but I'm no expert. This one has me stumped!
Problem is unbalanced sometimes. But there isn't any agitator dogs, or stabalizing spring. The suspension rods look good but I dont see the small springs that are supposed to be at the top of the tub and attached to the stabalizing rods.
Any suggestions?

via No agitator dogs? Unbalanced load help
by Dx2

Belt came off washer

GE, Front Load Washer
Model: GFWS1705H1DG
4 years old

Last 5 minutes of wash cycle (the spin), drum stopped spinning. No weird noises or anything.

Opened the back panel and the drive belt was on the ground.

It keeps slipping off when trying to put back on.

The drive pulley assembly moves in and out too. Tightened the nut and now when I spin the drum with the pulley it makes a “train coming into the station” screeching noise.

Any ideas?

via Belt came off washer
by DIYerJSK

Sears Kenmore Washer Making Weird Noise

We have a Kenmore washer 110.25132410 that just started making a weird noise. File is attached showing the noise. Seems to be running okay currently.

via Sears Kenmore Washer Making Weird Noise
by cmalinowski

Miele washing machine grinding sound

Hi,

While rotating the drum (also manually), there's a strong grinding sound at about 1/4 of a full rotation. 3/4 are completely smooth and 1/4 makes grinding sound like a metal to metal friction.

Any idea what it may be?

attached a short video.

Thank you.

via Miele washing machine grinding sound
by liormolnar

Grinding sound from washing machine

Hi,

While rotating the drum (also manually), there's a strong grinding sound at about 1/4 of a full rotation. 3/4 are completely smooth and 1/4 makes grinding sound like a metal to metal friction.

Any idea what it may be?

attached a short video.

Thank you.

via Grinding sound from washing machine
by liormolnar

How do you fix the Bosch washing machine door error 'no'?

I'm having issues with our Bosch Avantixx 7 washing machine.

After starting a program running about 1 minute the error code 'NO' shows up. Which implies that we're trying to open the wash machine door, which is obviously not true.
I've check the door and can't find any damages or heavy wear whatsoever.
Unfortunately the peep and error keep going continuously without stopping. Which makes it impossible to do laundry.

Any suggestions on how to fix this?

via How do you fix the Bosch washing machine door error 'no'?
by zowika