Maytag Kenvo washer

I have a washer that when it goes into the spin cycle it will start to spin and then slow all the way down to a stop and then speed back up. It will keep repeating and then will say done when my cl

via Maytag Kenvo washer
by bennnicka

Samsung Front Loader WF56H9100AW - grinding noise, auto locks, unlocks, then nothing...

HELP!

My samsung front loader is having an issue. The panel seems to be working fine, no error codes. When you select a cycle, there is a loud 'grinding' noise (continual), you can hear the door lock, about 10 seconds later it unlocks itself and nothing happens. Panel stays light the whole time.

We had a repair guy come who said it was the locking mechanism. He replaced it. That was def. not the problem.

Last cycle I ran was self cleaning (5 weeks ago!!!!!) and since then we've been dealing with this.

Any thoughts/ advice would be greatly appreciated! I've done all the standard fixes from cleaning everything, to making sure it's level, etc.

via Samsung Front Loader WF56H9100AW - grinding noise, auto locks, unlocks, then nothing...
by egood

Samsung Front Loader 9100 - grinding noise, auto locks, unlocks, then nothing...

HELP!

My samsung front loader is having an issue. The panel seems to be working fine, no error codes. When you select a cycle, there is a loud 'grinding' noise (continual), you can hear the door lock, about 10 seconds later it unlocks itself and nothing happens. Panel stays light the whole time.

We had a repair guy come who said it was the locking mechanism. He replaced it. That was def. not the problem.

Last cycle I ran was self cleaning (5 weeks ago!!!!!) and since then we've been dealing with this.

Any thoughts/ advice would be greatly appreciated! I've done all the standard fixes from cleaning everything, to making sure it's level, etc.

via Samsung Front Loader 9100 - grinding noise, auto locks, unlocks, then nothing...
by egood

Help! My beloved Maytag a612 is dead and I need a good replacement

I hear great things about the direct drive units made in the 90s by Whirlpool/Kenmore and plan to hit up Craigslist but not sure what model or series is the best. Any advice?

via Help! My beloved Maytag a612 is dead and I need a good replacement
by nyvram

Whirlpool agitator unscrews and can lift out

I have Whirlpool Washer Model WTW4850XQ1 the agitator came loose and I just lifted it out.I took the top part off and reattached After a load or two it works loose again? There's only the one bolt to tighten. Why is this happening?

via Whirlpool agitator unscrews and can lift out
by WBones

whirlpool washer stops after every stage

First off let me say that the model number is wrong. what i wrote in the model number area is a part number for the washer i have. every spot i checked for a model number that was stated in the "help me find my model number" had a part number not a model number. i was unable to find the model number.

I have a whirlpool autoload sensing top load washer.

this washer worked fine the only problem it was having was that it would not completely drain. i was able to resolve this problem. It ended up being dirt blocking the drain that i cleaned out.

On to the problem now. after i took the washer apart and put it back together is when a whole new problem began. The washer stops after every stage.
for example i start washer and it will sense the load then it stops. I then have to press the start/cancel button twice and the washer will fill (fills all the way to top regardless the load size). once it fills it stops again. i then have to press the start/cancel button twice again and it will agitate (short period of time), drain, rinse, and drain again. once it is done agitating, rinsing and draining, it stops again. i then have to press start/cancel twice again and it will spin.

I am still able to get threw every cycle of the washer but the washer will not go threw every stage in sequence on its own.

Before i fixed the draining problem this was not an issue. This only occurred after putting washer back together

Also when fixing the draining problem there were a few wire connections i unplugged when i was trying to find the draining issue. i thought this may have been the problem so i calibrated the washer but the problem is still occurring.

I also put the washer threw automatic test mode and everything worked fine, but i still can get my close to go threw an entire wash with out me having to manually start every stage of the wash myself.

via whirlpool washer stops after every stage
by wissbjj

Samsung WA48J7770AW/A2 error code 3c3 for restrained revolutions

I bought a Samsung WA48J7770AW/A2 top load washer on Craigslist. The washer gives an error code (I think 3c3) for restrained revolutions. When tilted back, raising the front legs a couple of inches, it spins fine.

The smallest movement of the tub creates a faint grinding noise and keeps the tub from spinning smoothly. When tilted back, the extra tension and the resting of the tub on the frame holds the tub still, keeping any error from occurring. I ordered two suspension rods, trying them in both the front and then the rear, with little to no difference made.

I am tempted to order two more so that all four are new, but I do not think this is the issue. I am wondering if perhaps the balance ring is bad. With the clutch disengaged (basket not spinning, just the agitator) it spins fine, making me believe the motor is fine. Any help would be greatly appreciated. Thanks

via Samsung WA48J7770AW/A2 error code 3c3 for restrained revolutions
by Flip23

Samsung wa48j7770aw/a2

I bought a Samsung wa48j7770aw/a2 top load washer on Craigslist. The washer gives an error code (I think 3c3) for restrained revolutions. When tilted back, raising the front legs a couple of inches, it spins fine. The smallest movement of the tub creates a faint grinding noise and keeps the tub from spinning smoothly. When tilted back, the extra tension and the resting of the tub on the frame holds the tub still, keeping any error from occurring. I ordered two suspension rods, trying them in both the front and then the rear, with little to no difference made. I am tempted to order two more so that all four are new, but I do not think this is the issue. I am wondering if perhaps the balance ring is bad. With the clutch disengaged (basket not spinning, just the agitator) it spins fine, making me believe the motor is fine. Any help would be greatly appreciated. Thanks

via Samsung wa48j7770aw/a2
by Flip23

trainer Kevin Rand and manager Jim Leyland came out to

VANCOUVER, BC – With 6:52 seconds remaining in Thursday’s game in which the Vancouver Canucks were clinging to a 3-2 lead, Jannik Hansen got whistled for a questionable interference call after he got tangled up with San Jose’s Adam Burish. Asics Gel Noosa Tri 8 Womens Sale . Considering the ice already seemed titled in the Sharks favour given the way they had stormed the Canucks net from the opening face-off, it seemed like the Hansen penalty would likely be the break San Jose needed to tie the game. That, however, wasn’t the case. As it has been through the first 14 games of the season, the Canucks penalty kill once again went about its business. Rising to the challenge in a pivotal moment, the Canucks managed to successfully run off the two minutes of short-handed time and the frantic five minutes that followed, and somehow escaped the Shark Tank with a one-goal victory. Despite giving up a power play goal to Logan Couture in the second period, the Canucks finished the night three for four on the penalty kill, pushing their recent run of success to 20 of the last 22 times they’ve been shorthanded. Overall, they sit sixth in the National Hockey League killing penalties with an efficiency rate of 87.3%. That’s up four percent from their final position a year ago when they started strongly on the penalty kill then, as with so many other facets of their game, faded badly in the second half of the season. The Canucks have needed to be strong on the penalty kill in the early going this season as only three teams in the league have been short-handed more than the 55 times they’ve been sent to the penalty box. Goaltending plays a huge role in any successful penalty kill and Ryan Miller has been spectacular in that regard. Including Thursday night, he has been beaten only four times while shorthanded. Chris Tanev (3:12) and Alex Edler (3:07) lead the way as the only Canucks skaters to average over three minutes of short-handed time per game, with Dan Hamhuis (2:39), Brad Richardson (2:29), Chris Higgins (2:10), Kevin Bieksa (2:05) and Nick Bonino (2:02) all over the two-minute mark. “It’s kind of a mindset,” Richardson said of successfully killing penalties. “I do a lot of it and it’s something I do take a lot of pride in. The specialty teams are a huge part of the game and we’ve taken a look at the stats and the more times we win the special teams battles we win the games. Definitely it’s a huge part of our success and every time you get out there you’re trying to focus on keeping the puck out of your net.’ In crunch time on Thursday night, the Canucks were able to make that happen to preserve their 10th victory of the young season. The challenge – and it will be a big one -- will be to keep the penalty kill sharp the remainder of the season. But right now, given the learning curve the Canucks are dealing with trying to implement new head coach Willie Desjardins’s systems in all areas of the ice, it appears the penalty killers are catching on quickly. “To me, there’s maybe a tiny bit of structure change but most of penalty killing is attitude and wanting to outwork the power play,” Richardson said about the changes Desjardins has made while playing a man or two short. “There might be some subtleties on how you fore-check or how you line up when they come at you, but I think most of it comes down to hard work.” Without question, the Canucks penalty killers are putting in the effort and that hard work has been rewarded. One look at Vancouvers lofty perch in the overall standings a month into the new season is proof of that. Asics Gel Kinsei 6 Mens . The senior threw for 319 yards and no interceptions in his final college game, leading No. Onitsuka Tiger Sale Online . Not because it was right, but because referees werent allowed to determine it was wrong. http://ift.tt/2rGYyJv . The best round belonged to Pat Perez. Tiger Woods didnt come close to claiming either Thursday in the Farmers Insurance Open, where the seven-time champion failed to break par in the opening round for first time in his career.DETROIT -- Omar Infante put on a power display that was more like his teammate Miguel Cabrera. Infante homered twice and drove in five runs and the Detroit Tigers beat the Cleveland Indians 10-5 on Saturday. The Tigers stretched their lead in the AL Central to 8 1/2 games over the second-place Indians. The Tigers were without Cabrera due to irritation of the abdominal area. The slugger left the two previous games early and has been hampered by a strained left abdominal for more than a month. He is day to day. "Cabreras huge. Everybody knows Cabreras a good hitter and were better with him in the lineup," Infante said. "But weve got a good team, weve got good hitting, weve got everything, good starters. Were a great team. Weve got everything." Infante hit a three-run homer in the second and added a two-run shot in the sixth for Detroit, which has beaten Cleveland seven in a row and 18 of the past 22. "The first one was a slider. I was trying to make contact, the slider stayed, hanging, and I made good contact," said Infante, who homered off Indians starter Scott Kazmir and reliever Bryan Shaw. "Ive been trying in BP, try to hit line drives. Sometimes I make a lot of fly balls. Try to work with my top hand, thats helped me a lot. "The second one was a good cutter, he threw a good pitch. Thats why I say Im working my top hand and try to hit line drives." Yan Gomes homered in the seventh and Carlos Santana added a two-run inside-the park home run for the Indians, who lost their fifth straight. Cleveland outfielder Nick Swisher tried to explain the teams struggles against Detroit. "Sometimes a team got your number," he said. "Just got to take it on the chin and keep moving. Keep fighting, thats all we can do." Tigers starter Anibal Sanchez (12-7) got the win. He allowed three runs and six hits in 6 2/3 innings, walking one and striking out five. Sanchez was replaced by Drew Smyly after Gomes home run with two outs in the seventh made it 6-3. Asics Onitsuka Tiger Mexico 66. Smyly got the final out and Jose Veras pitched the eighth, allowing Santanas inside-the park, two-run homer to make it 6-5. Tigers centre fielder Austin Jackson tried to catch Santanas drive to the wall by leaping as he raced back. He got his glove on the ball, but it came out as his arm hit the wall. Jackson slumped to the ground, appearing to favour his glove arm. Santana circled the bases for his 17th homer. Jason Kipnis, who had doubled, also scored. Jackson remained in the game after Detroit trainer Kevin Rand and manager Jim Leyland came out to check on him. "Just kind of jammed my shoulder a bit and knocked the wind out of me a little bit." Jackson said. "Once I caught my wind, I was all right." Detroit increased its lead with four runs in the eighth on Jacksons two-run triple, Jose Iglesias squeeze sacrifice bunt and Prince Fielders run-scoring double. "They kept coming at us," Indians manager Terry Francona said. "We fought back, which was good to see, but they just kept scoring." Cleveland relievers Matt Albers and Cody Allen each allowed two runs in one-third of an inning in the eighth. Kazmir (7-7) gave up four runs and seven hits in five innings. Notes: Outfielder-DH Jason Kubel, who was acquired from Arizona on Friday, joined Cleveland on Saturday. To make room for Kubel on the roster, the Indians optioned right-hander Carlos Carrasco to Triple-A Columbus. He will be recalled on Tuesday. ... Detroit recalled the contracts of left-hander Phil Coke and infielder Hernan Perez from Triple-A Toledo and sent right-hander Jeremy Bonderman to the same team. The Tigers also optioned right-hander Luke Putkonen to Class A Lakeland. Bonderman will be recalled to Detroit on Tuesday and Putkonen will return to the major league team on Monday. ... Sunday afternoons series finale will feature Justin Verlander (12-10, 3.73) for the Tigers against Danny Salazar (1-2, 3.67) for the Indians. Cheap NFL Jerseys Wholesale Jerseys Wholesale NFL Jerseys Jerseys From China Wholesale NFL Jerseys Cheap NFL Jerseys Cheap Jerseys ' ' '

via trainer Kevin Rand and manager Jim Leyland came out to
by bellis555

417.98702891 Stopped spinning & won't drain

It's always made this awful clacking noise but now it went into the rinse cycle and it's not moving or draining just making a humming sound. Is this a motor issue?

via 417.98702891 Stopped spinning & won't drain
by soho50

WM2010CW LG Front Load LE ERROR CODE

Hey guys
My LG WM2010CW front load washer is throwing an LE code after approximately 20 minutes of running.

When spinning, the motor makes unpleasant electrical noises and visibly has trouble spinning.

I already swapped the bearings and looked for any obstructions in the drum.
The drum can be spun freely by hand and does not make ANY noise. The noise only comes when spinning "electrically".
I even spun the drum with a drill and it was extremely quiet, so I think it's an electrical issue.

I tested the resistance of the coils which were all between 10-13ohms.
I also tested the hall sensor which alternates between 0-10V when I spin the rotor.

When it tries to spin, sometimes it spins fine but makes noise and sometimes it locks up completely.
But it is not a physical lockup, it actually feels and sounds like the electrical phases are fighting each other.
It seems like it is electrically locked up.

Any insight you can provide would be helpful. Thank you!!

via WM2010CW LG Front Load LE ERROR CODE
by kipster1203

LG Front Load LE ERROR CODE

Hey guys
My LG WM2010CW front load washer is throwing an LE code after approximately 20 minutes of running.

When spinning, the motor makes unpleasant electrical noises and visibly has trouble spinning.

I already swapped the bearings and looked for any obstructions in the drum.
The drum can be spun freely by hand and does not make ANY noise. The noise only comes when spinning "electrically".
I even spun the drum with a drill and it was extremely quiet, so I think it's an electrical issue.

I tested the resistance of the coils which were all between 10-13ohms.
I also tested the hall sensor which alternates between 0-10V when I spin the rotor.

When it tries to spin, sometimes it spins fine but makes noise and sometimes it locks up completely.
But it is not a physical lockup, it actually feels and sounds like the electrical phases are fighting each other.
It seems like it is electrically locked up.

Any insight you can provide would be helpful. Thank you!!

via LG Front Load LE ERROR CODE
by kipster1203

Front load washer not turning on - How to diagnose?

Press the start button and nothing happens - no lights, no nothing. Prior to this, it was working fine.

This is what i've done so far...

Using a multimeter, i checked...

1. Socket
2. Plug fuse
3. Power at the plug cable connector (which connects to the noise filter)
4. Power by back-probing the other connector of the wire that goes to the washer at the noise filter (check out picture below).
5. Random connectors at control board

What else can i do to find out where the problem is?

Attached Thumbnails

   

via Front load washer not turning on - How to diagnose?
by Elli

WT4970CW Top Load LG washer leak

Washer leaks small amount of water from rear panel, just to the left of the drain hose when viewed from the back. Leaks for only a minute or two during "wash" cycle. Repairman couldn't find anything wrong, but didn't run through whole cycle. Could it be the pump? Drain hose? Tub seal? How do I tell which, and why would it only occur for a short time, and only a couple of tablespoons of water? Will using it damage the gaskets? Thank you!

via WT4970CW Top Load LG washer leak
by Flopsycat

Topload LG washer leak

Washer leaks small amount of water from rear panel, just to the left of the drain hose when viewed from the back. Leaks for only a minute or two during "wash" cycle. Repairman couldn't find anything wrong, but didn't run through whole cycle. Could it be the pump? Drain hose? Tub seal? How do I tell which, and why would it only occur for a short time, and only a couple of tablespoons of water? Will using it damage the gaskets? Thank you!

via Topload LG washer leak
by Flopsycat

WF210 Samsung Washer, Where does this go?

I took apart my samsung washer to replace a bad spindle. Now I can't figure out where this hose goes. Can anyone help me???? Pic is in attachements I think.

Attached Thumbnails

 

via WF210 Samsung Washer, Where does this go?
by hager1026

Where does this go?

I took apart my samsung washer to replace a bad spindle. Now I can't figure out where this hose goes. Can anyone help me???? Pic is in attachements I think.

Attached Thumbnails

 

via Where does this go?
by hager1026

F-26, F-28 codes on WFW8400TW02 Whirlpool Duet Sport

I was washing a load of clothes and the door would not unlock (F26) after troubleshooting and attempting a fix it has now thrown a code for F28. I have removed, inspected and put back both the CCU and MCU and don't seen any signs of either being burnt up or damaged. And the door still locks and will not unlock after removing and inspecting that. I have checked my grounds and tightened all screws on both the front and back covers that have the sensor/switches. Any ideas?

via F-26, F-28 codes on WFW8400TW02 Whirlpool Duet Sport
by bbe3481

GE Front Load Washer

GE WCVH6800J1WW - Machine stalling during cycle. Could not get control board into test mode. Replaced control board on advice of repairman. Stalling still occurs with new board and new board will not enter test mode (signal, delay start, signal, delay start, etc.) Any suggestions? Can control board by "reset" by some other means?

via GE Front Load Washer
by WJMurphy

Fridgidaire Washer won't fill with water, lid latch clicks 3 times followed by 2 beeps

Fridgidaire Washer-Dryer combo (FFLE1011MW0). I have replaced the lid-latching mechanism as the original wouldn't unlock. Although I'm not sure that was the issue.
Now when I select "Normal" or any other wash selection (i.e. Casual) it will beep 3 times (normal) when moving to the setting, and I then press the selector in and release. After doing that, I hear and can feel like something opening towards the back of the washer to let water in(?) and then the lid safety latching mechanism moving in/out 3 times, followed by 2 beeps... then nothing.

Every once in a while, after (say) 20 tries, it does start filling with water and works normally with any combination of cold & hot water selected. I can pause it in the middle of the cycle, open the lid, restart it like normal. Once complete, it's back to trying again and again and again... to start the next load. The dryer works fine. Thanks!!!

via Fridgidaire Washer won't fill with water, lid latch clicks 3 times followed by 2 beeps
by Crash01