Whirlpool washer No light

Hi! My whirlpool washer, wtw5000dw1 has no lights when plugged in. I flipped the breaker, checked the outlet with a different appliance- it works. There is almost a draining type noise when it’s plugged in, but nothing actually happens and no lights come on at all. Please help! I need clean clothes- it’s football season!

via Whirlpool washer No light
by Brokenwhirlpool

Maytag front load MHW5630HC0 control panel

Please help. My Maytag washer control panel is working, all buttons except start. I have unplugged, check fuse box. I don't know what to do. Thanks.

via Maytag front load MHW5630HC0 control panel
by Helpplease

Haier QFW150SSN0WW winterizing

Good morning,

I have a problem, I am trying to solve and need to be creative to solve. I have a Haier washer and dryer stacked on each other at my cottage and need to winterize the front load washer. Per Haier you have to do the typical procedure, disconnect hoses, empty drain value in front. But the last step, I cannot do, due to the units are stacked and i do not have the luxury of unstacking to lift the washer 4-6" to drain the remaining water from the tub, due to the space where they...

Read more

via Haier QFW150SSN0WW winterizing
by dtiernan

Kenmore 110.2495300 making grinding noise and won’t spin

I’ve torn this thing apart, and all ready either checked or replaced, motor coupling, Agitator dogs, clutch, transition. It might be the basket drive. How would I tell?

via Kenmore 110.2495300 making grinding noise and won’t spin
by JakeToo

agitator removal for very old Eatons Viking Washing machine

Hi there,
I have a very old Eaton Viking 8 washing machine. Might be manufactured by GE - not sure.
I am fairly sure I have a dinner place mat between the inner and outer tubs, used to be able to see it thru holes in bottom of inner tub.
I believe it has gotten wound around the agitator shaft below the inner tub !?!
Machine wont spin in spin cycle, only turns very slowly.
I managed to pry the cap off the top of agitator but am now stuck, have no clue as to how to remove agitator -- to then...

Read more

via agitator removal for very old Eatons Viking Washing machine
by Billy Barr

Ghost neutral wire from water pump on GE washer

The neutral wire either broke or popped off location around its final destination from water pump, meaning somewhere up in the top panel. I Am brand new here so let me know if I need clarification and I really appreciate anyone who takes the time to look!

via Ghost neutral wire from water pump on GE washer
by zucanaryz@yahoo

GLWN5050M1WS Clicking noise during agitation and spin

Hi,

Just bought this GE washer that’s been in storage for a bit. I’ve been hearing a click-like noise during agitation and spin. Its very loud during final spin, making the slight clicking noise along with a louder “roaring” or “airplane” sound. I’ve taken the washer apart thinking it’s the bearing, but I’m not sure at this point. When I took the tub out, you can see this dry black/dark brown liquid stuff on the bottom panel. I’d heard before that this would call for a...

Read more

via GLWN5050M1WS Clicking noise during agitation and spin
by Kingbleach

Speed Queen AWNE82SP113TW01 filling up with water when not in use.

The washer drum is filling up with water when not in use and I can see a few drops coming from the water outlet at a steady rate, about a drop every 15 seconds.

I am presuming this is a faulty valve / solenoid that lets water into the tub, which now is slightly open?

I wanted to run this by the experts here before I go out buying parts. Does this seem correct?

Also I bought the washer 4 years and 5 months ago in May of 2017. Would this still be under warranty? There appears to be a 3...

Read more

via Speed Queen AWNE82SP113TW01 filling up with water when not in use.
by Jean Luc

Kenmore overfill

I I have a Kenmore washer model number 11010502999. So I replaced the metal clips that hold the upper ring to the tub. I put washer back together. Started load and washer over fills. I checked the pressure fill switch and it works properly. I blew into it and water stops filling. I checked the tube from bottom of tub. No leaks. I'm not sure if something is stuck in the tub but water will not come up and shut off the switch. Will just keep filling. Flooding out my house. Any suggestions? Can...

Read more

via Kenmore overfill
by Jspen

Amanda washer NTW4516FW1

Washer makes a loud noise while sensing auto fill and while washing. Does not make noise during rinse or spin cycle. I have attached a video of the sound.

via Amanda washer NTW4516FW1
by Shonta

Maytag wvwc565fw0 is almost ripping clothes. Agitator is very aggressive during wash. Spin cycle agitates and adds water rather than spinning.

I had just replaced actuator and splutch cam assembly because it would hardly agitate at all. Now it’s aggressively agitating. Video attached during spin cycle. Help please!

via Maytag wvwc565fw0 is almost ripping clothes. Agitator is very aggressive during wash. Spin cycle agitates and adds water rather than spinning.
by Needhelpfast

GE GFW650SPN0SN Washer Glass Door replacement

Hi all,
The inner glass to my 17 month old GE washer model GFW650SPN0SN shattered. I purchased new glass except I’m not sure how to get the door apart. I’ve had no luck finding a service manual for it. No screws on the interior or exterior of the door to take it apart. I assume the interior trim of the door just needs to be popped off to get at the screws except I don’t want to pry it up if I’m wrong.

via GE GFW650SPN0SN Washer Glass Door replacement
by italyqt