Fisher & Paykel washer WA37T26GW2 leaking when in recirculation mode

Fisher & Paykel washer WA37T26GW2 leaks water onto the floor only during the recirculation mode. Hoses, pump, main seal ~ the usual suspects, are all dry as a bone. Water from the recirculation hose splashes against the agitator and onto the inside of the cabinet front panel. When in recirculation mode FYI, wash basket is slowly turning at 25 rpm. Recirculation water spews robustly like a garden hose from it's outlet towards the agitator. It's as if recirculation is too vigorous. What...

Read more

via Fisher & Paykel washer WA37T26GW2 leaking when in recirculation mode
by dashriprok

WTW5000DW3 Whirlpool washer , works but grinding noise only during Spin Cycle

Good Evening,
New to the forum, i am having an issue with my whirlpool washer and its only just coming on to 2 years. I have a grinding noise that occurs only during spin cycle. I have checked out the other post on the same model by Paul F, however my noise seems to be coming from under the washer plate and not the circuit board. The noise comes and goes about 20 second at a time.

via WTW5000DW3 Whirlpool washer , works but grinding noise only during Spin Cycle
by Mighty Sweep

Whirlpool WTW8800YC1 SD Error Code

Hello,

My whirlpool washer is giving an SD error code. I have checked for blockage and ran a hot water cycle. At 16 minutes left in the cycle the tub went empty but the drain pump kept running for a long time even after the tub was empty. Finally when the SD error came up the washer started filling with water again and it filled up above half. I then pushed the power button to stop it from filling and it drained out. I felt like it drained out pretty quickly. Everything looks good inside...

Read more

via Whirlpool WTW8800YC1 SD Error Code
by DLMerritt08

Support bad bearjngs and seal

Does support Part# 280184 come with Part# 285203 bearing and seal kit on this washer

via Support bad bearjngs and seal
by Loinest76

Whirlpool WTW4950XW1

Lightly used unit. Was working intermittently. LED is not lit on control board which I'm am leaning toward id a failed control board.
Unit has AC power. Can purchase a rebuilt board for $185 with a lifetime warranty if I return the failed unit to them.
Thoughts?
Thanks

via Whirlpool WTW4950XW1
by Pequod

Maytag Bravos XL MVWB835DW4 F7E5 Error

I have a Maytag Bravos XL washer which is just over 2 years old. I have an F7E5 error code, I have already disassembled and there is nothing under the wash basket. I have also replaced the shift actuator.
Before this repair the machine was stuck between sensing and wash.
Now the machine will sense, wash, rinse but it will not spin and after clearing the codes I still have an F7E5 error code.

Any help in what the next step would be is greatly appreciated.

Thanks,
Candie

via Maytag Bravos XL MVWB835DW4 F7E5 Error
by ck9593