Fisher & Paykel Washer WA42T26GW1 96172-A Issues

I'm kind of at my wits end with this washer. Did a few self-repairs (replaced pump w/factory replacement including fuse kit, replaced main board fuse, and disassembled & cleaned, replaced lip seal o-ring/spring)

I got it working after the pump replacement, but after a water-on-the-floor issue I realized that the basket was floating. Why this is happening, I can only guess, but here's what I think:

I think the motor shaft is mobile, meaning it can move up and down, either locking the...

Read more

via Fisher & Paykel Washer WA42T26GW1 96172-A Issues
by Turbo

Samsung Flex washer

I have a Samsung Flex washer and dryer that are 5 years old. Yesterday the washer just lost power in the middle of a cycle of washing towels. When there was no power I checked the breaker and it had tripped it. I flipped the breaker back and unplugged the washing machine for a few minutes. I plugged it back in and it came on but it was stuck in the cycle that it left off on. It won’t let me end the cycle or do anything on the control panel. It’s turned on but stuck. After awhile it will trip...

Read more

via Samsung Flex washer
by Golfingdawg

Maytag MHW3505FW0 stuck on spin cycle

I’m at a loss here. I have 2 of these Maytags with the same exact issue. They both fill and wash perfectly, but when it’s time to spin, it’ll only spin very slowly (as if washing or balancing the load) , turn the pump on, then speed up to maybe medium speed for only around 5 seconds, then completely stops. The timer gets stuck on anywhere from around 7 to 9 minutes, and it just repeats the slow spin, pump, tiny bit faster spin, then stop. Both washers do this indefinitely. It does the same...

Read more

via Maytag MHW3505FW0 stuck on spin cycle
by Kingbleach

Kenmore washer model to identify

Hello, I tried to find the sticker to identify the model, without success. I looked at places Kenmore suggested the sticker could be.

Attached the picture of the front panel.

I need the model number to get the manual.

Thank you to help.
View attachment 63300
View attachment 63301

via Kenmore washer model to identify
by Sly66

Kenmore washer model to identify

Hello, I tried to find the sticker to identify the model, without success.

Attached the picture of the front panel.

I need the model number to get the manual.

Thank you to help.

via Kenmore washer model to identify
by Sly66

Replaced Bellows and Door won't close

Hi, I have a slightly older Fridgidaire Affinity ATF7000FS1 washer and the Door Bellows had a year in it. I replaced with an OEM new Bellows. Installed it correctly yet the door will not close and latch. I replaced the Hinge and Door latch mechanism with new replacements and it still won't close. I removed Bellows and the door will close properly. It seems to bind a bit on the left side of the door. Anyone have any ideas.

via Replaced Bellows and Door won't close
by Rar08

Whirlpool Front Load Washer has Trouble Spinning?

Hello Everyone.. I have a Whirlpool Front Load Washer WFW8500SR00. It has trouble spinning the drum. If I put a full load of laundry in it will not spin at all. If I put a small load in it works but sometimes when it tries to start spinning from a stop it stutters and makes a high pitched squeaking type noise.

I have tried a new belt but that didn't help. The drum itself spins freely and no bearing play. So that makes me think its the motor slipping? Is the motor serviceable at all? Or are...

Read more

via Whirlpool Front Load Washer has Trouble Spinning?
by ICECOLDBEER

GE Washer leaving too much water in load

We have a GE washer Model #:GTW750CSLWS and every load is still wet when the cycle finishes. Even if we put it on max spin we are having this issue. What could be causing this?

via GE Washer leaving too much water in load
by danhustonii