Kenmore Washer still shaking after new OEM suspension rods. 110.25132411

I replaced the suspension rods with OEM from Repair Clinic as suggested in a previous post, but the washer is still shaking violently... Maybe not as much as before the new suspension rods but... not good. I double checked all were seated properly and that the drum bounces right back into place, recalibrated the machine, and it is still banging around. Any thoughts?

via Kenmore Washer still shaking after new OEM suspension rods. 110.25132411
by RJD216

Speed Queen AWN632SP116TW02- foam at drain

I have a Speed Queen AWN632SP116TW02 top loading washer and noticed the other day at the end of the cycle there was excess foam coming out of the standpipe drain and falling down the wall. The washer is maybe 9 months old and just started doing this. I haven’t changed the amount of detergent I’m using (one tide pod). I looked through several threads and tried things suggested. I first tried draino down the standpipe thinking there was a clog but that wasn’t it. I have ran heavy duty hot...

Read more

via Speed Queen AWN632SP116TW02- foam at drain
by foamparty

Kenmore Elite HE5t front load washer terrible sound at the end of spin cycle

Hello,

Can someone please help me to identify the issue ?
Kenmore washer ('07, Model Kenmore Elite HE5t Model 110.47789700)
makes banging sound at the end of the spinning cycle
It spins ok even at high rpm and does that banging sound like a motorcycle at the end of spin
Video is here

Thank you

via Kenmore Elite HE5t front load washer terrible sound at the end of spin cycle
by pham

Keep Your Washing Machine Rust-Free with These Simple Steps

A washing machine is one of the most heavily used appliances in your home and it will display wear and tear over a long period of time. One of the most common problems that washing machines experience is rust. Rust can affect the physical aesthetic of the washing machine and aside from that it can also cause damage in the long run to your machine. But you must not worry because there are some simple ways you can do to keep your washing machine rust-free.

In this article, we will give...

Read more

via Keep Your Washing Machine Rust-Free with These Simple Steps
by shoppiverseph

Deactivating/removing coin requirement on Speed Queens

Hi there, I have a Speed Queen washer and dryer both coin op. I'm trying to bypass the coin requirement for my new tenants or even remove the entire mechanism altogether. I have attached pics of them. Is there a relatively easy way to do this?

via Deactivating/removing coin requirement on Speed Queens
by samsmith

GFW650SSN0WW GE washer spins slow then cancels cycle

Washer cancels any cycle part way through as soon as it tries to spin fast.

In the field service mode spin test, it will spin slowly for about five seconds and then stop.

I installed a new GE inverter board and now it won’t spin at all. So I put the old inverter board back in, and it’s back to only spinning slowly and then cancelling any cycle or spin test.

Anyone else solved this issue? Any special instructions when putting in a new inverter?

via GFW650SSN0WW GE washer spins slow then cancels cycle
by Lawnchair

Speed Queen won’t agitate.

I can hear motor running but no agitation. Spin works just fine.

via Speed Queen won’t agitate.
by petec

gtw465asnww Ge washer wont fill and no other modes work

Hi i have a problem i broke my moms washer.
I have a gtw465asnww washer that wont fill all the way and no other mode works. Each time i turn the center nob the lights change position. If for example i pick the jean cycle all the light turn off and when i press start i hear a buzz sound. any tips?

Here are all the fault codes





And here is the vedio of the other problem.

via gtw465asnww Ge washer wont fill and no other modes work
by Cool_kid2

Whirlpool wtw4800bq1 not agitating

It goes through its cycles and spins, but having this issue of it not agitating. Could it be the shift actuator?

via Whirlpool wtw4800bq1 not agitating
by PepInYaStep

GTW680BSJ4WS Lid Lock not engaging

I recently started having an issue where I could hear the washer trying to lock the lid, however, it would try twice and then just stop. I could hear the solenoid in the lid latch, but would not latch. I could play around with it with some screw drivers and it would work for a couple weeks and then start acting up. Been happening for at least 6-8 months. I didn;t know about the software updates at the time and was a used washer so have no history of updates or not. Well my switch...

Read more

via GTW680BSJ4WS Lid Lock not engaging
by Rupesy24

Old GE washer spinning like crazy extremely loud!

Hi everyone. I just acquired this washer used. It is extremely loud and in the spin and drain cycle it shakes wildly also if you put more then one thing in there it won't spin anymore I have taken a video. If anything else is required to help with a answer let me know. Thanks for any and all help!

via Old GE washer spinning like crazy extremely loud!
by budderlord

SpeedQueen awn432sp113tw04

I found water collecting underneath the washer so started taking things apart until I found the source. I've never taken a washer apart so I probably touched more than I needed to. I found the leak, was a hole in the drain hose down near the pump. I got a new one and replaced it no problem.

After I put everything back together the washer doesn't run through a cycle properly. On COLD it fills up the tub, stops, starts filling again, drains for a few seconds, stops, starts filling again...

Read more

via SpeedQueen awn432sp113tw04
by nomudnolotus

Maytag washer clicking noise MVWC400XW4

Hello

I have an older Maytag washer that clicks at the beginning of a cycle and runs but at times ends before the spin cycle. I have replaced the lid lick assembly and the problem remains.

Any idea what's causing this?

Thanks for your help!

via Maytag washer clicking noise MVWC400XW4
by suncarl

speed queen

Hi - any ideas what this high-pitched noise could be (listen to attached mp3 files)? It occurs mostly during agitation (washer.mp3) and during the high-speed spinning (Spinning Washer.mp3).
Thanks!

via speed queen
by avdw

Whirlpool washer not spinning. Think I messed up.

I started having an issue with my washer. At first my washer would not spin sometimes. Like, after a while of turning the washer off it would start to spin again.

Me and my husband decided to try change the motor coupler and the clutch assembly. We was having a hard time getting the couplers flushed. It was late at night and we just said there is no way and we left it the way it was and finished putting it together.

Note: I was able to spin the old motor coupler when everything was put...

Read more

via Whirlpool washer not spinning. Think I messed up.
by themightyunknow

MVWX655DW1 Shift Actuator reversed?

It is engaged onto the drum gear things when it is supposed to agitate, and isnt engaged on the gears when it should be spinning. This is what it looks like: https://drive.google.com/file/d/1ueq70LGrXEDYlhx7PcqUNa_H7d-Tstsw/view

I have replaced a shift actuator and a control board and it is doing the same exact thing. Something to note is that the first time I plugged my shift actuator in, it seemed to work properly at first but then my clothes were soaked when the washer stopped.

via MVWX655DW1 Shift Actuator reversed?
by Crayolas

MVWX655DW1 Maytag Loud Noise

Washer started making this noise last night during spin cycle. Now it’s making it anytime we try to start a load, we’ve stopped using for the time being. Any help would be appreciated!

Thanks

via MVWX655DW1 Maytag Loud Noise
by Shepm

Kenmore washer doesn't spin unless you open and close lid.

Replaced the lid switch yesterday, but that didn't fix it. What's next? Timer? Transmission?
I have a video of the issue, hopefully I can post it without issue. It makes noises and water is draining, but it's not spinning. Open and close and it's good to go.

Kenmore 110.26642500
Serial CS2503384
Type 111
June 2005

For more context, I actually had someone out yesterday as the washer was leaking water on the floor. They couldn't find any issues for the leak. Rather than...

Read more

via Kenmore washer doesn't spin unless you open and close lid.
by Prodeje79

Roper 7 Cycle - will not spin out

Hello- this is my very first post here and I might as well get off and running, lol.

My Roper washer worked fine until it started to not spin out on the final cycle. It agitates during wash fine. I removed the motor and transmission and kept it connected to the harness to simulate a rinse the center long shaft that turns the agitator doesn't turn but the small drum with the clutch does. The long shaft has a bit of a wobble also. Any ideas?

via Roper 7 Cycle - will not spin out
by lexluther1971

awn542sp111tw01 Motor overheats in Regular Cycle but not Perm Press

This is a 10 year old Speed Queen I have read through all the threads regarding motor overheating. My particular situation seems to be unique.

Regular normal wash selected, fabric select regular: Washer fills, agitates during the wash cycle, but stops and hums very loud when trying to drain (motor isn't turning).

After reading various threads, I have replaced the following items: Pump, timer, belt, timer, capacitor, cleaned and lubricated the helix.

Now, on Regular normal wash, fabric...

Read more

via awn542sp111tw01 Motor overheats in Regular Cycle but not Perm Press
by phillee1265

Kenmore Elite Oasis HE leaking *photos*

Water is dripping off of the bottom of this part here, although I cannot tell where it is coming from. It will soak a bath towel in 2-3 loads. Ideas?

via Kenmore Elite Oasis HE leaking *photos*
by Sarahlorrain

WT5070CW LG top load washing machine leaking

Hi, does anyone know a solution to this? Can’t find out how to fix this problem. It is leaking in the weirdest spot. On the bottom but in the front of the machine so it’s not coming from any hose. Hopefully the video I attached works. Thanks!

via WT5070CW LG top load washing machine leaking
by Pisano772

AWN432SP113TW04

My SQ washer is dripping water into the tub 24/7. I've researched and assume it's the fill valve/water inlet valve, but I'm having trouble finding the part #. Also, anyone have any good videos on how to replace? I see videos showing Maytag replacement from the control panel, but my SQ has the valve on the back with its own access panel.

Thanks in advance to people doing great work on this forum!

via AWN432SP113TW04
by mjbr24

Kenmore 700 Series smells like something is burning.

Good Afternoon,

I am wondering if anyone can help. My Kenmore 700 Series Model 110.28132410 smells like something is burning. Hear sparking noises and it will not run any cycle.
It just started today. I took a pic of the bottom. Not sure if its the motor and its burned or if that is dirt from the bottom.

via Kenmore 700 Series smells like something is burning.
by Kdiggy

GE WJRE5550H1WW Clothes still wet after spin

Hello all. Towels/wash rags still wet at the end of the rinse/spin cycle. Doesn't seem to be a problem with other clothes. I could find no blockages in washer drain system. Drain pump had a bit of end play in impeller and being 14 years old I replaced the pump. I watched a complete cycle and everything seems to be fine except: during the spin cycles the drain pump only ran for a short time at the beginning and again at the end of the spin cycle. Seemed to drain fine after wash cycle. Only...

Read more

via GE WJRE5550H1WW Clothes still wet after spin
by hoot

Speed Queen AWN542SP111TW01 loud during spin

Out of the blue today, my washer started making a very loud noise during the spin cycle. Gets louder the faster it spins.

via Speed Queen AWN542SP111TW01 loud during spin
by Hthrkln

CTW41N1AW Criterion Washer - Adhesive on water pump. Do I need it?

The water pump on my Criterion CTW41N1AW (I think it is made by Whirlpool) clothes washer died. I have a new one coming today but wanted to ask a question. When I took the old original one off along with the bolts that part had no gasket that I could see and it looked like it was sealed on with a yellow adhesive. The new part I purchased to replace it looks like it is the same one but the new one has a black gasket like material where it joins the tub. They also had it smeared on the...

Read more

via CTW41N1AW Criterion Washer - Adhesive on water pump. Do I need it?
by maestroc

W11330506A/W11330507ASP Whirlpool washer turned on by itself

Hello,
My washer turned on by itself in the middle of the night. I unplugged it and now it stopped turning on by itself.
But when turning it on, it makes noises on its own as if it started a cycle, but no water comes in and it doesn't spin.
All buttons except the START button work. There is no error symbol/code that appears.

I tried resetting it by pressing the POWER button for 3 sec as suggested by the manual, but it only turned off the washer.
Unplugging, waiting for a few minutes...

Read more

via W11330506A/W11330507ASP Whirlpool washer turned on by itself
by muriel27

Washing Agitation squeak, with load

Good morning,
I have had a repair company try to fix my brand new Maytag washer with no luck, looking for help.
When the washer has a load, whether clothes or just water, in agitation mode it squeaks, every time it moves, no squeak happens when in test mode and there is not weight in the drum.
Parts replaced are the gear pulley, along with the actuator that moves the gear up and down.

Any help will be greatly appreciated.

via Washing Agitation squeak, with load
by Cratoppel

Whirlpool Cabrio Wont spin

Hoping you experts can help me fix the no spin issue with my whirpool cabrio top load washer.

Initially, the washer was very loud during the spin cycle, so I replaced the bearings, shaft, and seal with oem parts. While doing this, I messed up the RPS, so I replaced that with the entire kit that included the wiring harness.

Now the washer will not spin on its own.
I can spin the tub by hand very easily.

When in diagnostic mode, I get F82, F41, F51, and F50.
While in manual diagnostic...

Read more

via Whirlpool Cabrio Wont spin
by aj10203

Washers pump keep blowing up

I have an old Inglis top loading washer (maybe 15 years old) and a few months ago the pump stopped working. Everything else was working fine, but when it got to the pump cycle it just wouldnt do anything. So I replaced it with a similar Inglis washer (model #IA4200) that I had on the side, maybe a few years older. Now that one is doing the exact same thing. It washes and spins and everything, but it will not pump. I still have the first one and can confirm that the pump itself is not...

Read more

via Washers pump keep blowing up
by steff_ff3

Popping / clicking sound in Kenmore HE3 washing machine

I have an abnormal sound in a Kenmore Elite HE3 front loading washing machine. The washer is functioning with zero problems. The clothes get very clean, it's just a bit annoying if I leave the laundry room door open.

It appears to be correlated to the rotation angle of the tub. It is not a normal loud bearing sound. I replaced the bearing about two years ago and it's been working great but now has this popping sound that increases in frequency as the tub spins faster. I can manually...

Read more

via Popping / clicking sound in Kenmore HE3 washing machine
by Jcoder

Maytag Board

I have this Maytag washer that just started to act up. I tried to put it in a diagnostic mode and it won't do it. Then I noticed when you try to spin the dial to any cycle the light on the dial stays where ever it started from when you powered it on. I'm thinking it's the board because it won't go into diagnostic mode in the first place. I would like to get a better idea on what's causing it before I replace a expensive board.

via Maytag Board
by tseibring

MVWX500BW0 makes noise and does spin but cloths still wet

Please help. I have the MAYTAG MVWX500BW0 washer and I have these issues:

1.) Making noise when spinning (maybe bearing worn out?)
2.) When doing full or medium load it leaks water under the washer.
3.) After spinning the cloths are still wet, but it seems like pump is working but making lots of noise. I have to unplug the washer from power, wait 1-2 min then plug it back and put it on drain and spin mode and then the cloths are less wet after it finishes the cycle.

Spining Noise...

Read more

via MVWX500BW0 makes noise and does spin but cloths still wet
by dusand

Maytag clicking noise during agitation. MVWB835DW4

The noise only happens with the agitation changes direction from counter clockwise to clockwise.

via Maytag clicking noise during agitation. MVWB835DW4
by Gonzo559

Coin Trap

I have an issue with my LG Washer WM3400CW.
I noticed my washer started smelling really funky and used the little hose to drain the water. Not much came out.

Then I notice the coin trap access. When I unscrewed it, about 2-3 quarts of water came out. I ran the washer through a cycle and it did smell better. I thought that was the end of my issue.

I then noticed when the washer was finished, the clothes at the bottom were still soaking wet. There was water still in the washer. I opened...

Read more

via Coin Trap
by Waltz C

Samsung wf337aag/xac main pcb

Hello, brand new to this forum, looking for some guidance. I have read online, watched videos, and searched this forum before coming here, as well as a few people I know irl who had the same issue ... kind of a last resort here.

Our Samsung wf337aag washer has worked fine for 10ish years. in October wife noticed that the spin cycle to drain the water etc was stopping randomly and taking hours to complete a load. I took apart the pump assembly, flushed it, checked for debris and damage. I...

Read more

via Samsung wf337aag/xac main pcb
by dantric

Recommendations for a new dishwasher

Our kitchenaid has been nothing but a hassle. Have loved a Bosch in the past. What is the most reliable to buy? I'm not against used. If 5 yr old xxx brand was great but new xxx brand is poor, then I'm happy with an older one.
Would consider shelling out more for a miele... but i seem to see a fair number of those for sale used, due to needing a part replacement.
I feel like a dishwasher needs a garburator and a strong drain pump, and 90 percent of issues could be avoided?
Looking forward...

Read more

via Recommendations for a new dishwasher
by Tyler H

Maytag Neptune Stacked Gas Center

I have a Maytag Neptune Stacked Gas Center. It's a great model and does good work, unfortunately recently it stopped working. I'm a father of 5, and we use unit heavily, but it's a work horse and love it. The issue with the unit is that when you put towels inside, I turn the knob to heavy, max extract, and cold water. As soon as I hold the start button for 2 seconds, the unit starts adding water, I can hear it, however I don't hear it rotate (spin). After a few moments, the unit is doing...

Read more

via Maytag Neptune Stacked Gas Center
by ccalderon70

Maytag Washer Gear Case Replacement

I have a 1.5-year-old Maytag MVW7230HW and the bearing is bad, yes after a year and a half! Once I replace the gear case do I have to perform some sort of reset? If so, how much of a pain is it?

via Maytag Washer Gear Case Replacement
by cmb0034

Another will not spin thread

I have a GE washer model WPRB9220C0WW that does not spin. I have been reading all of the great information here and before I contribute it to the waste stream I would just like to make sure I am not missing anything.

My wife ran a heavy load this weekend and complained that the clothes were still wet after the cycle completed. It agitates, fills with water, and drains just fine. I have inspected and cleaned the pressure valve line, confirmed that the lid switch is operable, checked the...

Read more

via Another will not spin thread
by Dan Frye