Lid Switch Bad, but because of connection

Model W10089728 Maytag. I've found that the lid switch is not functioning properly. There is corrosion from the 3 wire harness that is connected to the lid switch. I will need a new lid switch and the wire harness that connects to it. Please help!

via Lid Switch Bad, but because of connection
by austin17

WAS20160UC Bosch washing machine failing to fill fully with water on initial wash, and on rinse cycle

Washer will add water, but not enough. Clothes generally start and are not fully wet. We tried replacing the water sensor, which seemed to improve the rinse cycle a little, but wash cycle still failed to fill fully.

Serial: FD920501498

via WAS20160UC Bosch washing machine failing to fill fully with water on initial wash, and on rinse cycle
by JBennett

Maytag Centennial - Not Spinning or Agitating

I have a Maytag Centennial that stopped spinning and agitating. I can hear the hum of a motor during the spin cycles.

via Maytag Centennial - Not Spinning or Agitating
by wongdp

Bosch washing machine failing to fill fully with water on initial wash, and on rinse cycle

Washer will add water, but not enough. Clothes generally start and are not fully wet. We tried replacing the water sensor, which seemed to improve the rinse cycle a little, but wash cycle still failed to fill fully.

Serial: FD920501498

via Bosch washing machine failing to fill fully with water on initial wash, and on rinse cycle
by JBennett

Kenmore washer 110.92597400 does not agitate

Washer has developed an intermittent problem where it does not agitate. Timer is turning and fill, drain and spin work fine. If I start at the beginning of the cycle it will fill do nothing while timer runs through the wash cycle and then when the timer reaches the Darin it will drain, spin and fill for rinse. Again it does nothing until tit reaches drain and spin. Sometimes it works just fine through the whole cycle. Sometime it starts to agitate halfway through the was cycle. Any thoughts...

Read more

via Kenmore washer 110.92597400 does not agitate
by Brianbuzz

WM77110NBL01 Blomberg Washer cycle timer not counting down

I know, I know you don't know European brands (though isn't Blomberg now Turkish or Azerbaijani or something and is only trying to sound Danish or German?)

in any event, a tenant's Blomberg clothes washer is not counting down.

when the Wash programme is selected, it takes in water but....the cycle timer just sits there 00:52.

has anyone experienced this?

Peter

via WM77110NBL01 Blomberg Washer cycle timer not counting down
by pjstock

Blomberg cycle timer not counting down

I know, I know you don't know European brands (though isn't Blomberg now Turkish or Azerbaijani or something and is only trying to sound Danish or German?)

in any event, a tenant's Blomberg clothes washer is not counting down.

when the Wash programme is selected, it takes in water but....the cycle timer just sits there 00:52.

has anyone experienced this?

Peter

via Blomberg cycle timer not counting down
by pjstock

AWN632SP116TW01 Speed Queen TC5000 Washer outer drum not moving

My tc5000 classic speed queen puchased in 2020 has an issue, the outer drum is not spinning counterclockwise during agitate it's trying to but is dragging for some reason. Any ideas on how to fix it, I know it's under warranty but I dont have any vacation left to meet the repair guy .Anyone know what the problem is, iI suspect the brake pads are dragging but don't know forsure and if so how to repair.

via AWN632SP116TW01 Speed Queen TC5000 Washer outer drum not moving
by man-a-fre

speed queen tc5000 outer drum not moving

My tc5000 classic speed queen puchased in 2020 has an issue, the outer drum is not spinning counterclockwise during agitate it's trying to but is dragging for some reason. Any ideas on how to fix it, I know it's under warranty but I dont have any vacation left to meet the repair guy .Anyone know what the problem is, iI suspect the brake pads are dragging but don't know forsure and if so how to repair.

via speed queen tc5000 outer drum not moving
by man-a-fre

GE. GTW460ASJWW

Having issues with not pumping out and cutting off.
I tryed watching diagnostic code videos.
I thought the problem was stopped up pressure tube nipple but that was all clear.
I pulled the pump and impellers were clean. Noticed a hole in bottom of pump where entergizer slides on bottom of shaft and oil/grease everywhere.
Could this be my problem?

via GE. GTW460ASJWW
by Thankyou

Washer buying advice

I need to buy a washer and am looking at the GE 4.2 size at Lowes. They are on sale for a little under 600.00 for a few more days. I have also looked at an old Speed Queen at a used appliance store for 400.00. It was made in either 2004 or 2009. Which would be the better investment? Thank you so much!

via Washer buying advice
by BonPow

WFMC2100UC/01 Bosch Washer screen shows its working but nothing is happening

I have a Bosch front loader.
When you turn it on it shows the timer and it starts to countdown, etc. (Ex: For a regular wash the clock starts at 52 minutes and will count down and go through the whole cycle).
BUT nothing happens- the water doesn't go in, nothing spins, etc.
If I turn it to DRAIN, it will make the sounds like it is draining, so it seems like that works.
Any help???
Thank you

via WFMC2100UC/01 Bosch Washer screen shows its working but nothing is happening
by Beemer

Washer screen shows its working but nothing is happening

I have a Bosch front loader.
When you turn it on it shows the timer and it starts to countdown, etc. (Ex: For a regular wash the clock starts at 52 minutes and will count down and go through the whole cycle).
BUT nothing happens- the water doesn't go in, nothing spins, etc.
If I turn it to DRAIN, it will make the sounds like it is draining, so it seems like that works.
Any help???
Thank you

via Washer screen shows its working but nothing is happening
by Beemer