Hello, I have a Samsung front loading washer model number WF410ANR/XAA. Recently, the washer would not stop filling with cold water. I noticed the extra water running down the inside of the door after a cycle would finish.
Unplugging power did not interrupt the flow of water. Based on this test, I replaced the corresponding cold water inlet valve. The problem has seemed solved for a few days but tonight the same symptom has returned. Cold water is flowing after the cycle is complete and the unit is turned off. Unplugging power does not stop the flow.
Cycling the water valve on the wall a few times seems to do the trick. Any help would be very much appreciated. Thank you!
Unplugging power did not interrupt the flow of water. Based on this test, I replaced the corresponding cold water inlet valve. The problem has seemed solved for a few days but tonight the same symptom has returned. Cold water is flowing after the cycle is complete and the unit is turned off. Unplugging power does not stop the flow.
Cycling the water valve on the wall a few times seems to do the trick. Any help would be very much appreciated. Thank you!
via Washer intermittently won't stop filling - even after new valve
by carlsaiyed
No comments:
Post a Comment