Recently, my ten year old Whirlpool GHW9150PW0 Washing Machine started acting up. The Control Locked led would stay lit and the machine would stop mid cycle. I could see that there was still water inside the locked machine. I talked to my co-workers and they recommended that I check the coin trap. Yeah, there was a lot of coins and debris in the trap. I thought my problems were solved. I ran the machine after the trap was cleaned. During the Normal Cycle (40 Minutes) the water entered the drum and the drum would rotate back and forth, but I would hear a lot of beeps. Three beeps in sequence. Once when the drum rotated right and once when the drum rotated left. At about 38 minutes, the Time Remaining leds would start to flash. Then the flashing would stop and the Time Remaining leds would indicate three dashes. The drum would stop moving and the display would indicate three dashes for several minutes. The machine would go to the drain sequence, pump out the water and shut off. There were never any fault codes displayed. I learned how to perform the self tests. The machine goes through all of the self tests and does not fail. I ordered a Computer control card and will replace it soon. Does anyone have an idea as to what I should do next?:disgust:
via Washing Machine beeps three times, displays three dashes, then after several minutes drains
by rlroussey
No comments:
Post a Comment