Sunday, February 28, 2021

Maytag Bravos XL HELP

Please advise.

I have a Maytag Bravos XL that’s 3 years old. The washer won’t fill the tub with water and start it’s cycle. I was getting a code “LF” and I pulled the water solenoid inlet valve out of the machine to inspect it for and clogs. The part is super clean and had around 800 ohms to each solenoid. So I did a bench test by hooking up a hose to the cold water valve, turned the water on and the valve is closed as it’s supposed to be. Then I attached a two wire cord to it and plugged...

Read more

via Maytag Bravos XL HELP
by Hansmcc

Friday, February 26, 2021

Kenmore stack washer making a noise

Hey guys. I’m working another stackable. This one makes a grinding/rubbing noise that is rhythmic at the end of the spin cycle when it is slowing down. I’m going to attach a video. I’ve also taken a picture of the bottom of the tub. There looks to be a gap between that shim and the bearing. Machine sounds great when it is in spin cycle. But when it disengages and slows down is when the noise starts.

via Kenmore stack washer making a noise
by mountainbiker33

Tuesday, February 23, 2021

Kenmore Washer 110.25132411 making a grinding noise and from checking it, not agitating

Hi everyone. My washer has been making a grinding noise and from checking it, it is not agitating. However it does spin and drain. In the last few days I changed the following parts: basket driven hub kit, washer pulley kit & the actuator. After changing the hub kit last night, it started agitating and I was able to get through a full wash with no problems but then it went back to making a grinding noise and no agitating. Could it be the transmission?
I thought about changing out the wash...

Read more

via Kenmore Washer 110.25132411 making a grinding noise and from checking it, not agitating
by Jgtrz

Monday, February 22, 2021

Running out of options. Kenmore VMW washer...

Hi everyone. My washer has been making a grinding noise and from checking it, it is not agitating. However it does spin and drain. In the last few days I changed the following parts: basket driven hub kit, washer pulley kit & the actuator. After changing the hub kit last night, it started agitating and I was able to get through a full wash with no problems but then it went back to making a grinding noise and no agitating. Could it be the transmission?
I thought about changing out the wash...

Read more

via Running out of options. Kenmore VMW washer...
by Jgtrz

Sunday, February 21, 2021

Cannot open Bosch washer 300 series (WAT28400UC) filter.

Hello,

I am not sure how to open a washer filter. It is an area where coins and other stuff should be collected.
There is a round door in front right bottom of the machine. Behind the door there is a filter lock.
I supposed to unscrew a big blue plastic "screw" - lock. I can turn it for about half of the full turn and then it stops. Should I force it further or it can be pulled at this point?
It looks like it is blocked, it is not turning anymore.
It is a new machine, it is the first time...

Read more

via Cannot open Bosch washer 300 series (WAT28400UC) filter.
by Grenader

Saturday, February 20, 2021

BOSCH WFMC3200UC/01 Front Load Clothes Washer - Water filling slowly when not in use

I believe my washer developed an issue this week during the Artic blast of cold weather we had here in central Texas.
The washer is filling the tub with water very slowly even without being powered on or selecting a wash cycle. Logic seems
to dictate that the water inlet valve is malfuntioned (possible crack from a freeze) and allows water in power or not.
Looking for confirmation of my thinking.

Bill
Paige, TX

via BOSCH WFMC3200UC/01 Front Load Clothes Washer - Water filling slowly when not in use
by BillCTX

BOSCH WFMC3200UC/01 Front Load Clothes Washer

I believe my washer developed an issue this week during the Artic blast of cold weather we had here in central Texas.
The washer is filling the tub with water very slowly even without being powered on or selecting a wash cycle. Logic seems
to dictate that the water inlet valve is malfuntioned (possible crack from a freeze) and allows water in power or not.
Looking for confirmation of my thinking.

Bill
Paige, TX

via BOSCH WFMC3200UC/01 Front Load Clothes Washer
by BillCTX