Kenmore Washer still shaking after new OEM suspension rods. 110.25132411

I replaced the suspension rods with OEM from Repair Clinic as suggested in a previous post, but the washer is still shaking violently... Maybe not as much as before the new suspension rods but... not good. I double checked all were seated properly and that the drum bounces right back into place, recalibrated the machine, and it is still banging around. Any thoughts?

via Kenmore Washer still shaking after new OEM suspension rods. 110.25132411
by RJD216

Speed Queen AWN632SP116TW02- foam at drain

I have a Speed Queen AWN632SP116TW02 top loading washer and noticed the other day at the end of the cycle there was excess foam coming out of the standpipe drain and falling down the wall. The washer is maybe 9 months old and just started doing this. I haven’t changed the amount of detergent I’m using (one tide pod). I looked through several threads and tried things suggested. I first tried draino down the standpipe thinking there was a clog but that wasn’t it. I have ran heavy duty hot...

Read more

via Speed Queen AWN632SP116TW02- foam at drain
by foamparty

Kenmore Elite HE5t front load washer terrible sound at the end of spin cycle

Hello,

Can someone please help me to identify the issue ?
Kenmore washer ('07, Model Kenmore Elite HE5t Model 110.47789700)
makes banging sound at the end of the spinning cycle
It spins ok even at high rpm and does that banging sound like a motorcycle at the end of spin
Video is here

Thank you

via Kenmore Elite HE5t front load washer terrible sound at the end of spin cycle
by pham

Keep Your Washing Machine Rust-Free with These Simple Steps

A washing machine is one of the most heavily used appliances in your home and it will display wear and tear over a long period of time. One of the most common problems that washing machines experience is rust. Rust can affect the physical aesthetic of the washing machine and aside from that it can also cause damage in the long run to your machine. But you must not worry because there are some simple ways you can do to keep your washing machine rust-free.

In this article, we will give...

Read more

via Keep Your Washing Machine Rust-Free with These Simple Steps
by shoppiverseph

Deactivating/removing coin requirement on Speed Queens

Hi there, I have a Speed Queen washer and dryer both coin op. I'm trying to bypass the coin requirement for my new tenants or even remove the entire mechanism altogether. I have attached pics of them. Is there a relatively easy way to do this?

via Deactivating/removing coin requirement on Speed Queens
by samsmith

GFW650SSN0WW GE washer spins slow then cancels cycle

Washer cancels any cycle part way through as soon as it tries to spin fast.

In the field service mode spin test, it will spin slowly for about five seconds and then stop.

I installed a new GE inverter board and now it won’t spin at all. So I put the old inverter board back in, and it’s back to only spinning slowly and then cancelling any cycle or spin test.

Anyone else solved this issue? Any special instructions when putting in a new inverter?

via GFW650SSN0WW GE washer spins slow then cancels cycle
by Lawnchair

Speed Queen won’t agitate.

I can hear motor running but no agitation. Spin works just fine.

via Speed Queen won’t agitate.
by petec

gtw465asnww Ge washer wont fill and no other modes work

Hi i have a problem i broke my moms washer.
I have a gtw465asnww washer that wont fill all the way and no other mode works. Each time i turn the center nob the lights change position. If for example i pick the jean cycle all the light turn off and when i press start i hear a buzz sound. any tips?

Here are all the fault codes





And here is the vedio of the other problem.

via gtw465asnww Ge washer wont fill and no other modes work
by Cool_kid2

Whirlpool wtw4800bq1 not agitating

It goes through its cycles and spins, but having this issue of it not agitating. Could it be the shift actuator?

via Whirlpool wtw4800bq1 not agitating
by PepInYaStep

GTW680BSJ4WS Lid Lock not engaging

I recently started having an issue where I could hear the washer trying to lock the lid, however, it would try twice and then just stop. I could hear the solenoid in the lid latch, but would not latch. I could play around with it with some screw drivers and it would work for a couple weeks and then start acting up. Been happening for at least 6-8 months. I didn;t know about the software updates at the time and was a used washer so have no history of updates or not. Well my switch...

Read more

via GTW680BSJ4WS Lid Lock not engaging
by Rupesy24

Old GE washer spinning like crazy extremely loud!

Hi everyone. I just acquired this washer used. It is extremely loud and in the spin and drain cycle it shakes wildly also if you put more then one thing in there it won't spin anymore I have taken a video. If anything else is required to help with a answer let me know. Thanks for any and all help!

via Old GE washer spinning like crazy extremely loud!
by budderlord

SpeedQueen awn432sp113tw04

I found water collecting underneath the washer so started taking things apart until I found the source. I've never taken a washer apart so I probably touched more than I needed to. I found the leak, was a hole in the drain hose down near the pump. I got a new one and replaced it no problem.

After I put everything back together the washer doesn't run through a cycle properly. On COLD it fills up the tub, stops, starts filling again, drains for a few seconds, stops, starts filling again...

Read more

via SpeedQueen awn432sp113tw04
by nomudnolotus

Maytag washer clicking noise MVWC400XW4

Hello

I have an older Maytag washer that clicks at the beginning of a cycle and runs but at times ends before the spin cycle. I have replaced the lid lick assembly and the problem remains.

Any idea what's causing this?

Thanks for your help!

via Maytag washer clicking noise MVWC400XW4
by suncarl

speed queen

Hi - any ideas what this high-pitched noise could be (listen to attached mp3 files)? It occurs mostly during agitation (washer.mp3) and during the high-speed spinning (Spinning Washer.mp3).
Thanks!

via speed queen
by avdw

Whirlpool washer not spinning. Think I messed up.

I started having an issue with my washer. At first my washer would not spin sometimes. Like, after a while of turning the washer off it would start to spin again.

Me and my husband decided to try change the motor coupler and the clutch assembly. We was having a hard time getting the couplers flushed. It was late at night and we just said there is no way and we left it the way it was and finished putting it together.

Note: I was able to spin the old motor coupler when everything was put...

Read more

via Whirlpool washer not spinning. Think I messed up.
by themightyunknow

MVWX655DW1 Shift Actuator reversed?

It is engaged onto the drum gear things when it is supposed to agitate, and isnt engaged on the gears when it should be spinning. This is what it looks like: https://drive.google.com/file/d/1ueq70LGrXEDYlhx7PcqUNa_H7d-Tstsw/view

I have replaced a shift actuator and a control board and it is doing the same exact thing. Something to note is that the first time I plugged my shift actuator in, it seemed to work properly at first but then my clothes were soaked when the washer stopped.

via MVWX655DW1 Shift Actuator reversed?
by Crayolas

MVWX655DW1 Maytag Loud Noise

Washer started making this noise last night during spin cycle. Now it’s making it anytime we try to start a load, we’ve stopped using for the time being. Any help would be appreciated!

Thanks

via MVWX655DW1 Maytag Loud Noise
by Shepm

Kenmore washer doesn't spin unless you open and close lid.

Replaced the lid switch yesterday, but that didn't fix it. What's next? Timer? Transmission?
I have a video of the issue, hopefully I can post it without issue. It makes noises and water is draining, but it's not spinning. Open and close and it's good to go.

Kenmore 110.26642500
Serial CS2503384
Type 111
June 2005

For more context, I actually had someone out yesterday as the washer was leaking water on the floor. They couldn't find any issues for the leak. Rather than...

Read more

via Kenmore washer doesn't spin unless you open and close lid.
by Prodeje79

Roper 7 Cycle - will not spin out

Hello- this is my very first post here and I might as well get off and running, lol.

My Roper washer worked fine until it started to not spin out on the final cycle. It agitates during wash fine. I removed the motor and transmission and kept it connected to the harness to simulate a rinse the center long shaft that turns the agitator doesn't turn but the small drum with the clutch does. The long shaft has a bit of a wobble also. Any ideas?

via Roper 7 Cycle - will not spin out
by lexluther1971

awn542sp111tw01 Motor overheats in Regular Cycle but not Perm Press

This is a 10 year old Speed Queen I have read through all the threads regarding motor overheating. My particular situation seems to be unique.

Regular normal wash selected, fabric select regular: Washer fills, agitates during the wash cycle, but stops and hums very loud when trying to drain (motor isn't turning).

After reading various threads, I have replaced the following items: Pump, timer, belt, timer, capacitor, cleaned and lubricated the helix.

Now, on Regular normal wash, fabric...

Read more

via awn542sp111tw01 Motor overheats in Regular Cycle but not Perm Press
by phillee1265