LG Washer not agitating

LG washing machine WT7200CW only a year and a half old. Within the first 3 months, it started making loud banging sounds when switching from drum spin to agitator spin. Under warranty at that time and the Clutch assembly was replaced by a technician. It has now stopped agitating. I removed the pulsator and the plastic gear is stripped on the agitator. I ordered a new pulsator (AGZ72909702) and the shaft size is incorrect. I then ordered a different part number (AGZ72909701) and same problem...

LG Washer not agitating

via LG Washer not agitating
by VanMann654

Washer control board

It want spin but it will agitate. It has a burnt spot on circuit board in top right corner.

via Washer control board
by THenley

Impeller removal

Customer Problem: Washer would not go into spin cycle. I did run self Diagnostics... when it got to Spin Cycle it wanted to agitate fast, then shut down on overload.
Troubleshot and determined it needed a new Washer Cam Splutch Kit and a new W10528947 Hub Kit.
Problem: I can not get the impeller off, Heated it with a heat gun it still will not come off.
Needless to say after working on it for an hour at the customers residence I consider not to do anymore damage to it and threw in the...

Impeller removal

via Impeller removal
by Willyjay59

Maytag Bravos X MVWX700XL2

Hello,

Was washing clothes yesterday and noticed the timer sticking on 5 minutes. Had to manually stop and put it on rinse and spin to get the water out. I did the diagnostic today and found the code saying excessive time to drain, however, it drains perfect when on the drain and spin program. Did a normal cycle with only water, and once it gets to the spin portion of the cycle at the 13 min remaining, it never kicks in or runs and water. Almost like it skipped the rinse cycle as well. I...

Maytag Bravos X MVWX700XL2

via Maytag Bravos X MVWX700XL2
by Grainwater1122

Maytag Bravos XL

I have a Maytag Bravos XL MVWB835DW0. I stumbled on an error code F7 E8. Can't find info on this or how to run diagnostics test. Does anyone know what this error code is? Machine will not operate.

via Maytag Bravos XL
by Captfriday64

Fisher Paykel WA37T26GW1 washer fault 51 - diverter valve question

Hi All -

I know this is a somewhat uncommon brand (at least here in the US) but I'm hoping someone might be able to offer some assistance on a problem I'm having with my Fisher Paykel WA37T26GW1 washer.

A couple of weeks ago, my washer began stopping about 15 minutes in to the wash cycle. It would beep steadily at one second intervals and display a 00110011 pattern on the "wash progress" lights. My service sheet indicated that this corresponds to a Fault 51 / diverter valve fault code...

Fisher Paykel WA37T26GW1 washer fault 51 - diverter valve question

via Fisher Paykel WA37T26GW1 washer fault 51 - diverter valve question
by rorrer

WFMC1001/UC Bosch - How much water should a washer use for a front loader?

Mine uses about a 1 gallon at startup then a gallon to rinse. I tried this on empty but it timed the same, with cloths or empty. When I try to wash a large blanket the middle is dry. Does the same on hot or cold. Do I have a bad load sensor switch?

via WFMC1001/UC Bosch - How much water should a washer use for a front loader?
by mike Liz