GE Washer leaving too much water in load

We have a GE washer Model #:GTW750CSLWS and every load is still wet when the cycle finishes. Even if we put it on max spin we are having this issue. What could be causing this?

via GE Washer leaving too much water in load
by danhustonii

Speed Queen 2018 Washer (Model # TR3000WN) - Rinse and Wash Blkining 2x

Hi, first thank you for taking time out to read my post.

This washer is about 3 years old (just a few months past warranty, of course .

We started getting the Wash/Spin blinking error a while ago, and we could just unplug the washer for 10 minutes, then plug back in and it would complete a cycle. Now, that no longer works. The washer fills fine, washes and agitates fine, but when it is time to spin and drain it stops, and this error appears. I try to manually run a rinse/drain...

Read more

via Speed Queen 2018 Washer (Model # TR3000WN) - Rinse and Wash Blkining 2x
by HalleluYAH

News Flash!! It's a MIRACLE! Clothes Washer Repairs Itself!!

Okay, I KNOW you guys don't want to (nay, WILL NOT) delve into the quirky world of European makes and models but you really have to listen to this story (and maybe I could get you to just think broad strokes, in a Non-brand/model specific way What The Heck Could Be Going On.)

I swear, my Blomberg clothes washer (WM77110NBL01 - I used the BOSCH label in the post details as there is no Blomberg choice) appears to be resurrected, back from the dead. and without my changing anything.
and I am...

Read more

via News Flash!! It's a MIRACLE! Clothes Washer Repairs Itself!!
by pjstock

Maytag problem

Ok started having issues with this. Washer would run its normal cycle then it would get stuck with the spin light on. Ran the codes came up with f2e1,f9e1 and f5e1. So I cleared the codes ran the automatic test all worked until I got to the fill and drain part. It filled but didnt drain. Then went into manual mode tried to drain nothing. Now it shows no fault codes and still won't drain. I'm afraid to try and start it from the beginning cycle. I'm thinking bad board at this time?

via Maytag problem
by Rtufixer

FAGOR FUS-6116 IT doesn't start (F04 error)

Hi.

My washing machine has recently stopped working without warning mid wash. All it says since is "F04", which according to the manual means the machine doesn't start, although it doesn't specify why. It does however suggest that it might be because the door is not shut properly - as far as I can tell the door is closing completely though - is it possible that the problem is indeed with the door, just something that isn't immediately apparent?
Otherwise I have checked the pump filter and...

Read more

via FAGOR FUS-6116 IT doesn't start (F04 error)
by danmaxine

W6022 ASKO front-load washer doesn't unlock door at end of cycle.

ASKO model W6022 type WM25.1 front-load washer does everything properly but does not unlock the door at the end of the cycle. Also, all error lights are on at end of cycle but are not blinking. Clothes are spun out but door still stays locked. Door can be unlocked by pushing the unlock button so door is working. All other functions of the washer work properly.

via W6022 ASKO front-load washer doesn't unlock door at end of cycle.
by dashriprok

Front Loaders and Drain Plug Smell

Do modern front load washers suffer from the smell that develops at the drain plug? I'm getting tired of manually cleaning out my nasty drain plug on my old Whirlpool Duet (circa 2008) washer. The smell just dominates the house for days after cleaning. I want to get a new front loader as they are just better than top load for my situation but if they all suffer from the drain plug smell then maybe I'll just ride this Whirlpool out another decade.

via Front Loaders and Drain Plug Smell
by tony99c