Bosch Nexxt 500 won't spin. Pump or control module?

I'm getting an error E:04 when completing a rinse and I don't get any spin post rinse. Most of the water drains except for the last bit then the pump just runs and runs but no spin then error out. I cleaned the pump cleanout really well and ran washer cleaner affresh 5 times now. The pump seems to work (not any weird noise and it pumps out lots of water after the wash cycle and on rinse before the error) but still no spin. Manual says if not all the water is drained it won't start...

Bosch Nexxt 500 won't spin. Pump or control module?

via Bosch Nexxt 500 won't spin. Pump or control module?
by Matildar2662

Not completing spin cycle/continuous cycle running

Maytag Bravos washer. The washer is not completing the spin cycle and then moves to done. The washplate appeared to be “ spinning out” faster than the drum and had bad grinding noise. Took apart washer , cleaned out some change, cleaned out gunk. Put everything back together, ran calibration. The calibration went accordingly. The grinding stopped but the spin cycle/ rinse repeat still happening. Tried again. Found clothes come out wet. It spins some , drains , then start a rinse cycle...

Not completing spin cycle/continuous cycle running

via Not completing spin cycle/continuous cycle running
by Cbwork

522701-W0 beaumark washer on spacesaver 27 drive belt doesn't fit

522701-W0 beaumark washer on spacesaver 27 drive belt doesn't fit

It will not fit around the idler arm no matter which way I move it. I have pictures I f anyone needs them, really need help here.

via 522701-W0 beaumark washer on spacesaver 27 drive belt doesn't fit
by Ryankubb

Kenmore 700 Series 110.27711600 not spinning

Hi, I’m having a problem with my Kenmore 700 Series washing machine isn’t spinning. Sometimes it will start to spin and then it stops after about 5-10 seconds. I’ve tried rebalancing the load. It doesn’t spin even when the washer is empty. I’ve looked underneath. I don’t see anything that looks broken. The washer works otherwise. It agitates. It just doesn’t spin (other than the occasional 5-10 seconds). Any idea on what could be wrong?

via Kenmore 700 Series 110.27711600 not spinning
by Henrybacchalus

GTW680BSJ0WS ERROR CODE 5 & 7 Fills but will not run

Hi, washer fills then stops, will not drain. Went into diag mode and noted codes 4,5 and 7. Have found doesn't qualify for software update and cannot find any TSB related to codes. Thoughts please.

via GTW680BSJ0WS ERROR CODE 5 & 7 Fills but will not run
by Pcougar

Washer doesn't start

My Amana ntw4516fw2 is about 1-2 yrs old and will not start. It has not been used much and has been idle for 8 mo.
Has power at receptacle. Any ideas?

via Washer doesn't start
by kirkbu

GE Washer GTWN4250D1WS only fills with cold water when lid is shut

When I start a wash cycle, and leave the lid up while the water fills the tub, then the water comes out the correct temperature, but if I close the lid, the tub fills with cold water only, no matter what temperature is selected.

What is likely the cause?

via GE Washer GTWN4250D1WS only fills with cold water when lid is shut
by nlcala