LG Washer WT4801CW UE code

The original problem is the display board wouldn't respond. Replaced the main control board. Everything worked fine for a week or two. Then the UE code started. It happens when it switches from wash to spin, and only while clothes are in it. No clothes, no code. The Impeller spline is fine. The plastic gears and splines in the clutch area all look fine. There seems to be a type of either chatter, or stuttering between the agitate and spin cycles. The impeller is moving at this time, but doesn't seem to skipping.

Any ideas?

via LG Washer WT4801CW UE code
by vallen

LG Washer wt4801cw UE code

The original problem is the display board wouldn't respond. Replaced the main control board. Everything worked fine for a week or two. Then the UE code started. It happens when it switches from wash to spin, and only while clothes are in it. No clothes, no code. The Impeller spline is fine. The plastic gears and splines in the clutch area all look fine. There seems to be a type of either chatter, or stuttering between the agitate and spin cycles. The impeller is moving at this time, but doesn't seem to skipping.

Any ideas?

via LG Washer wt4801cw UE code
by vallen

WM2101HW LG front loader will not spin or agitate

My LG front load washer will not spin or agitate. I have attempted the reset multiple times. I have replaced the rotor sensor and main circuit board without any changes. It will first look like it starts to rotate the drum in the first few seconds but with a heavy noise. Then it will eventually lock up and stop and sends the LE code. Bearings look new and no leaks. Drum spins freely by hand with a slight high pitch rubbing noise. Any help would be appreciated!!!

via WM2101HW LG front loader will not spin or agitate
by Mark_Thompson

Samsung WF45N5300AW will not power on

Hey guys, my 2 year old Samsung WF45N5300AW will not power on. I am furious because the warranty ran out last month. Does anyone have a service manual for this model? What would be a good place to start looking at voltages? I have 120v coming into the unit and was looking for some pointers. Thanks, Dean

via Samsung WF45N5300AW will not power on
by bizzs

LG front loader will not spin or agitate

My LG front load washer will not spin or agitate. I have attempted the reset multiple times. I have replaced the rotor sensor and main circuit board without any changes. It will first look like it starts to rotate the drum in the first few seconds but with a heavy noise. Then it will eventually lock up and stop and sends the LE code. Bearings look new and no leaks. Drum spins freely by hand with a slight high pitch rubbing noise. Any help would be appreciated!!!

via LG front loader will not spin or agitate
by Mark_Thompson

MVWX655DW1 Washer not spinning

I have read the many posts that have the same title and issue. They were not helpful.

My washer is about 2 1/2 years old. Within the first week of having it the machine would not complete the total cycles. It eventually stopped doing that and operated properly again.

About twice a year it would revert back to that issue but would always fix itself. This time it has not fixed itself. It is stuck in the final spin cycle. However, it begins to spin and abruptly stops. The door lock light flashes and the lid remains locked. It eventually unlocks the lid but the spin light will continue to flash. I have unplugged it many times for varying amounts of time with 10 hours being the longest. Whenever the power is restored it enters right back in to the stuck spin cycle.

I have tried removing the drum and plate but the plate is stuck. At this point I want to light the whole thing on fire and move.

Please help me!
-Chiv

via MVWX655DW1 Washer not spinning
by ckm88

FIXED: WF330ANB/XAA Samsung front load washer displaying ND

Hi guys, have a Samsung front loader washer model WF330ANB/XAA which is 8 yr old machine. The machine stopped during the rinse cycle and started displaying ND code( no drain). So started another normal cycle from the beginning, this time the drum doesn’t rotate or fill with water , but can hear the motor sound and after 10 min it displays the same ND code.

I did these troubleshooting steps. Manually drained , cleaned the filter of the debris and still same ND error. I went ahead and replaced the drain pump, still no luck . The machine won’t work( spin) even on spin only cycle.

When working correctly, once we start a load in normal cycle, the washer drum rotates to redistribute the clothes for few min and then fills it with water, but now the initial drum rotation is not happening nor is it filling with water, just motor sound and after a few min into the wash cycle displays ND code even without water.

Anyone wants to take a shot at this? I am not sure if it’s the drum, pressure switch or anything else. Thanks

via FIXED: WF330ANB/XAA Samsung front load washer displaying ND
by Kiran