Maytag Bravos - SD Code

6 year old Maytag Bravos top load washing machine.

I've replaced the drain pump, the rotor positioning sensor and I've pulled the wash basket out, no debris in filter or drain hose. Going on day 4 without a washing machine.........help!!!

Clean cycle - runs for ten minutes and throws SD code.....
Normal cycle - starts at 41 minutes, runs normal for 5 minutes, then drops down to three minutes before the SD code appears....

Smells like a hint of burned electronics.....

PLEASE HELP ME!!

via Maytag Bravos - SD Code
by CoachDan

neptune tl fav 6800

I have about completely rebuilt this washer, and being a not so smart pearson, I disassembled the clutch assembly. Everything looks ok, except, I can't remember which one way bearing goes where?
I know they are one way bearings, but I forgot to mark how I removed them from the unit.
Anyone know which bearing goes to the top and which goes to the bottom?
Top counter clockwise? or Bottom?
I know, you don't have to say it "why did I take them out"? LOL
So far-replaced motor control board and...

neptune tl fav 6800

via neptune tl fav 6800
by tbopilot

Washer won’t agitate or spin

Hello my name is Eric,

My washer won’t agitate or spin, It will fill and drain and the timer seems to be working fine.
I took the front panel off, tested the magnetic lid switch and it seems to be functioning properly. The LED light is showing a 6 flash error code. I did the motor reset opening the door and closing 6X it 12 sec. That did reset the motor Error code to normal function but returns to 6 flashes when I run a cycle. I’m thinking the motor is bad but want to see if there is...

Washer won’t agitate or spin

via Washer won’t agitate or spin
by DI-WHY Guy72

GE washer Model GTWN4250DOWS start button not working.

Hi,
My washer is only about 4 yrs old. It has been giving me trouble for about a year now, not starting. I have to repeatedly push the rubber start button to get it going. Well today it will not start at all. Lights are on. I’ve done the suggested reset of the machine and have even taken the front panel off and unplugged/replugged the control board connections to ensure they are all connected well. After reading up on threads here, I think I need a new control board. I appreciate any...

GE washer Model GTWN4250DOWS start button not working.

via GE washer Model GTWN4250DOWS start button not working.
by GinaN

Maytag Neptune won't drain

Hello, I've got an old maytag neptune mah3000aww, the drain pump sometimes works fine, other times won't drain at all. When it doesn't work I can hear a slight electrical hum but pump is not running. If I rotate dial around to spin cycle again , then pump will start and drain normally. Is this a bad pump or something else in control dial?
Thanks

via Maytag Neptune won't drain
by Farmerchad

Inglis Washer Burning rubber smell, can’t locate belt

Hello I have an Inglis by whirlpool washer which I can’t find the model number on, even after tearing it apart, pictures included and I have unbolted the motor which only drops about an inch however I can’t locate the belt nor see any sign of it. But after unbolting the motor and plugging it back in, it seems to spin fine. I can’t seem to figure out this issue

via Inglis Washer Burning rubber smell, can’t locate belt
by Dlippiett

Burning rubber smell, can’t locate belt

Hello I have an Igris by whirlpool washer which I can’t find the model number on, even after tearing it apart, pictures included and I have unbolted the motor which only drops about an inch however I can’t locate the belt nor see any sign of it. But after unbolting the motor and plugging it back in, it seems to spin fine. I can’t seem to figure out this issue

via Burning rubber smell, can’t locate belt
by Dlippiett